Italian Machine Builder GAP Installs 27-Layer Blown Film Line
System consists of nine extruders feeding 400-mm annular die, an automatic gauge-controlling air ring, and other features.
GAP, a film-extrusion machine builder based in Italy, has recently installed a 27-layer microlayer blown film line in its R&D center in Trecate. The new line is comprised of 9 extruders and a 400-mm, annular coextrusion die capable of producing film in layflat widths to 1600 mm. The line is also equipped with an automatic air-cooling ring control and a new software control system.
To date, GAP (gapitaly.com) has tested several structures on the microlayer line, both with blocks and alternating layers, and is said to have generated film with good mechanical properties at overall film thickness of around 20-25% below than the industry standard.
GAP says it will soon test structures with multiple alternate zones. It notes that with microlayers, the thin layers of polymer are more easily oriented, allowing processors to run not only PE but also PP to increase the rigidity of the material and decrease pin holes.
GAP has been in business since 2004, and also makes double-bubble and water-quench film lines, as well as lines for extrusion coating.
More details on the system will be reported in the August issue of Plastics Technology.
Related Content
-
How Polymer Melts in Single-Screw Extruders
Understanding how polymer melts in a single-screw extruder could help you optimize your screw design to eliminate defect-causing solid polymer fragments.
-
Formulating LLDPE/LDPE Blends For Abuse–Resistant Blown Film
A new study shows how the type and amount of LDPE in blends with LLDPE affect the processing and strength/toughness properties of blown film. Data are shown for both LDPE-rich and LLDPE-rich blends.
-
Cooling the Feed Throat and Screw: How Much Water Do You Need?
It’s one of the biggest quandaries in extrusion, as there is little or nothing published to give operators some guidance. So let’s try to shed some light on this trial-and-error process.