Relief for Hot Summer Toolrooms
DME thinks of your mold techs in the dog days of summer.
June's Amerimold 2014 show in Novi, Mich. featured lots of mold components and other hardware and software for moldmaking and repair. But DME Co., Madison Heights, Mich., broadened the concept of toolroom products. It showed off new offerings designed to make workers more comfortable and productive in hot toolrooms during the summer.
One example was Squiche electrolyte drinks in powder “fast packs” or sticks to dissolve in water. Also available are new fans for cooling work areas. Supplied by Airmaster Fan Co., Jackson, Mich., these include floor-mounted pedestal models and ceiling-mounted versions, as well as water-misting fans.
Related Content
-
Tunnel Gates for Mold Designers, Part 1
Of all the gate types, tunnel gates are the most misunderstood. Here’s what you need to know to choose the best design for your application.
-
How to Optimize Pack & Hold Times for Hot-Runner & Valve-Gated Molds
Applying a scientific method to what is typically a trial-and-error process. Part 2 of 2.
-
Where and How to Vent Injection Molds: Part 3
Questioning several “rules of thumb” about venting injection molds.